Lab Biochemical Incubator

Although drug discovery has received much attention in the pharmaceutical industry, stability also plays an equally important role. Drugs must remain effective and safe for a long time after they leave the production facility. Ensuring this security requires a series of technologies and applications. Stability and light stability testing of active pharmaceutical ingredients and finished products Stability and light stability tests are used for research aimed at providing information about how active pharmaceutical ingredients (API) or finished pharmaceuticals (FPP) change over time and are affected by temperature, climate, and light. The follow-up inspection period, expiration date and recommended storage conditions of the active pharmaceutical ingredients are determined based on these data. In conducting these studies, the incubator is the key. Stability test Phase stability test The level of stability testing is often divided into three categories: mandatory, accelerated, and real-time stability. In the mandatory stability test, the company exposes the compound to harsh environments, such as high temperature or humidity. The temperature is usually close to the melting temperature of the active pharmaceutical ingredient. This can also include testing under strong light. The results can be used to predict reaction kinetics. Accelerated stability testing is less demanding. It can include, for example, a temperature of 50 degrees Celsius to predict what might happen to the drug over a long period of time at room temperature. For real-time stability testing, the pharmaceutical company stores the drug at room temperature, natural light, and the expected humidity level of the drug sales area. These tests usually run for several years. In addition, real-time testing must include potentially destructive scenarios. “It covers whether someone left the medication on the dashboard of the car and then went to the beach that same day, or if the medication shipped around the world was left out on the pallet at the airport,” Ladd said. Consumers may think that the therapeutic drug product in the home medicine cabinet effectively achieves the effect claimed on its label. Similarly, medical professionals expect prescription products to meet efficacy, safety, and stability requirements. The confidence of both parties is based on the expectation of biopharmaceutical companies to thoroughly test therapeutic products long before they enter the market. Considering stability, constant climate manufacturers need to know that when the product is placed on the shelf, it will not lose its effectiveness or degrade into dangerous things. For the stability test of the finished product, the product is stored under controlled conditions, and then periodically removed from these conditions and checked to ensure that it meets the standards. Various characteristics are measured to create degradation lines during the product's shelf life. In some cases, a study may span multiple years. For a substance that is under development but has not yet been approved for clinical use, the company cannot wait for several years due to competitive pressure, market demand, and tight time for patent expiration. In order to speed up the stability testing process, scientists put the substance under pressure conditions such as high humidity and temperature to highlight stability issues more quickly. If they have standardized technologies, practices, and data to support integrated methods of stability testing and analysis, they can also use virtual models. Virtual testing, also called computer testing, can usually predict stability issues early in the research and discovery phase. The constant temperature and humidity drug stability chamber is a reliable and high-efficiency environmental test chamber that meets the test requirements. The XCH Biomedical environmental protection box is designed with imported technology and imported high-quality parts and components, with stable and reliable performance. It is a reliability and efficiency environmental test chamber that meets the test requirements.

Lab Biochemical Incubator for growing and maintaining microorganisms or cell cultures "The purpose of a laboratory incubator is to provide a controlled, contamination-free environment for safe and reliable work in cell and tissue culture by regulating conditions such as temperature, humidity, and carbon dioxide. Laboratory incubators are essential for the growth and storage of bacterial cultures, cell and tissue culture, biochemical and hematological research, pharmaceutical work and food analysis. " "Biochemical BOD incubators (Biological Oxygen Demand) are used to maintain temperature for testing tissue culture growth, storage of bacterial cultures and cultures that require a high degree of thermostatic accuracy. The basic difference between an incubator and a BOD incubator is temperature. Universal incubators only have a heated option and typically operate at 37°C, while BOD incubators, also known as cooled incubators, have both cooling and heating options and typically operate at low temperatures such as 10°C and 21°C. " The difference between biochemical incubator and mold incubator 1. Functional difference The biochemical incubator does not have the functions of humidity control and disinfection, while the mold incubator has both the functions of humidity control and disinfection. Therefore, a mold incubator of the same volume is slightly more expensive than a biochemical incubator. The mold incubator is equipped with a germicidal lamp, and the biochemical incubator does not need to be installed. Mold incubators are available with or without humidification, while biochemical incubators have no humidification option. Both of them can be used for bacterial culture. If the bacterial culture does not require refrigeration, an electrically heated constant temperature incubator can also be selected. 2, The difference in use Biochemical incubators are widely used in the culture and preservation of bacteria, molds, microorganisms, tissue cells, as well as water quality analysis and BOD detection, suitable for breeding experiments and plant cultivation. It is an important experimental equipment for scientific research institutions, colleges and universities, production units or department laboratories such as biology, genetic engineering, medicine, health and epidemic prevention, environmental protection, agriculture, forestry and animal husbandry. Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. Since most molds are suitable for growth at room temperature (25°C), some humidity is required when growing on solid substrates. Therefore, a general mold incubator consists of a refrigeration system, a heating system, an air humidifier and a cultivation room, a control circuit and an operation panel. And use a temperature sensor and a humidity sensor to keep the temperature and humidity of the culture room stable. Some special mold incubators can also be set to change the temperature and humidity with the incubation time. Difference between Microbial incubator and Bacterial incubator Microbial incubators, also known as "heat-only" or "standard" incubators, have heating elements that provide incubation temperatures just above ambient. If the ambient temperature in the lab is around 22°C, they can only handle incubation temperatures higher than around 27°C or even 30°C. Bacterial incubator is used for the storage of bacterial plates and the growth of bacterial cultures at 37 degrees Celsius. These incubators are only equipped with heated temperatures; therefore, these are also called heated incubators. Besides, Cooling Incubator Cooling Incubator, also known as "cooled" incubators, have both cooling and heating capabilities to provide a wider temperature range - also near or even below ambient. They also typically cover a range of incubation temperatures above ambient temperature - as "microbe" or "heat-only" incubators do. The investment in refrigerated incubators is higher due to the use of more sophisticated technology.

Does it matter where you buy your Temperature and humidity Equipment? Not all lab equipment suppliers are created equal. Here's why you should get a quote from XCH Biomedical: Competitive price Since XCH Biomedical acts as the manufacturer, you get the best price possible - unlike a distributor who buys a product and then charges you a premium. Not only do we offer great prices, but we also offer premium equipment packages. Give the right advice We work with a number of laboratory equipment consultants and construction and engineering firms to advise on new builds or refurbishments. But no matter what, we are your resource. Even after projects are complete, companies keep calling us for ideas and advice on equipment purchases and we are happy to help. 50+ years of experience We've sold thousands of pieces of lab equipment, which means we know how to avoid common challenges and pitfalls that can arise during the buying process. If you need help purchasing a single piece of equipment or an entire laboratory for new construction, let our experience save you time, money and hassle. No unexpected costs We believe in total transparency, which means we will not charge you anything during the process. Our pricing is pre-determined and our goal is to help you understand the complete cost from ordering and delivery to setup and training. Training Our experienced, factory-trained representatives have the expertise to answer your questions and help you select exactly the products you need. They can also help you set up your equipment, provide training for you and your lab technicians, and answer questions throughout the product's lifecycle. One stop supplier With our extensive experience in laboratory equipment, including stability chamber, high and low temperature test chamber, Lab Biochemical Incubator, lab drying oven, etc. customer service is our top priority. Whether your laboratory requires a single replacement unit or an entire equipment package, XCH Biomedical is your one-stop supplier for all your laboratory equipment needs.